Samsung Prostar 56, 56EX, or 1224

This is a multi-step process which involves entering administrator programming and then setting the date and time. Programming can be done from any display telephone.

1. Enter administrator level programming with your handset on-hook, press #20.  Your display then shows (OPEN SYSTEM PGM- ENTER CODE:).
2. Dial your 4-digit pass code 4321 (which is the default pass code), the display then shows (OPEN SYSTEM PGM- CLOSED).  If the pass code 4321 does not work as stated, please see Prostar 56/1224 Notes.
3. Press the MUTE key and the display will show (OPEN SYSTEM PGM- OPEN).
4. Press # and your phone returns to idle condition.  You must begin programming within 60 seconds.  Once in programming, any delay of more than 60 seconds between keystrokes will cause the system to automatically close programming.
5. Dial #70  and the display shows (YY MM/DD HH:MM).
6. Enter the current date and time as follows:
   YY= Last two digits of the year
   MM= Month (01 for January through 12 for December)
   DD= Day of the month (01-31)
   W= Day of the week (1-7; Week begins on Monday and ends on Sunday)
   HH= Hour (Use 24 hour clock--Failure to enter time in 24 hour clock will cause the date to change at 12:00 noon.)
   MM= Minutes (00-59)
7. Dial # to store and exit.  The phone now returns to normal use and all display phones have been updated to the correct date and time by this action.  If invalid data is entered, you will receive the (INVALID ENTRY) message for three seconds. Reenter the correct date and time.  Should the information entered be incorrect, please repeat the procedure.

Prostar 5EX/1224 Notes:  4321 is the default code for entering administrator programming.  Some systems have reversed this to 1234.  Please try this if 4321 does not work.  What's more, the system Administrator can change this code if desired.  If the code has changed, please input the new code here instead of 4321.  

Samsung Digital phone systems... including DCS, DCS Compact, DCS 50si, DCS 400si, iDCS 500, iDCS 100, DS 616

And Samsung Voice mail systems... including SVMi-4, SVMi-8, and Cadence.

This is a multi-step process which involves entering administrator level programming and then setting the date and time.  Programming can only be done from a 12 or 24 button display telephone.

1. With your handset on-hook, press TRSF and then dial 200. Your display then shows ENABLE CUS. PROG. PASSCODE:
2. Dial your 4-digit pass code 1234 (which is the default pass code).  The display then shows ENABLE CUS. PROG. DISABLE.  If the pass code 1234 does not work as stated, please see Samsung DCS Notes below.
3. Dial 1 to enable. The display now shows ENABLE CUS. PROG. ENABLE.
4. Press TRSF and the keyset will return to its idle condition.  Once you have entered administrative level programming, you must begin programming within 30 seconds.  Any delay of more than 30 seconds between keystrokes will cause the system to automatically exit the programming mode.
5. Next enter the new date and time as follows:
   Press TRSF and then dial 505. The display then shows the current date and time setting on your system.  The example below shows Monday, April 7, 2003, 9:30 AM.
6. OLD: 0  04   07   03  :  09  30
   NEW:WMMDDYY:HHMM.
7. Enter the correct date using the dial pad as follows:
   W= Day of the week (0-6; Week begins on Monday and ends on Sunday)
   MM= Month (01-12)
   DD= Day of the month (01-31)
   YY= Last two digits of the year (01)
   HH= Hour (Use 24 hour clock and enter the range of 00-23)
   MM= Minutes (00-59)
   Press TRSF to store and exit programming.  If you have entered invalid data, you will receive an INVALID ENTRY message for three seconds.  Reenter the date and time.

The new date and time will now be updated for all LCD phones on the system.  Some internal voice mail systems use this time and date setting.  These include SVMi-4, SVMi-8, and Cadence voice mail systems.  Other voice mail systems must be set independently from the telephone system.  We have listed instructions for several popular voice mail systems above.

Samsung DCS Notes:  1234 is the default pass code for entering customer programming.  The system administrator can change this code if desired.  If the code has been changed, please input the new code instead of 1234.